Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

2.15. Suspension bracket and steering check

THE GENERAL DATA

Fig. of the Detail of a forward suspension bracket of cars FJ60, 62, fig. the Forward suspension bracket of cars FJ80 see.

Check

PERFORMANCE ORDER

1. Establish wheels in driving position on a straight line, block wheels. Turn a steering wheel to the right and to the left. If it is felt considerable люфт, the reason is deterioration of bearings of naves (subsection 2.39), a shaft of a steering column, an intermediate shaft, spherical support of levers of a suspension bracket or spherical hinges of the steering mechanism, either wrong adjustment or deterioration of the steering mechanism see. 2. In abnormal work and deterioration of details of a steering and a suspension bracket specify strengthened качание bodies at movement on bumpy road, drift at turn, steering wheel jamming. 3. Check up work of shock-absorbers for what some times sharply press each corner of the car and release. If after one-two pressing the car body does not come back in a starting position it specifies in failure of racks of a suspension bracket and necessity of their replacement. By pressing and release the car listen to sounds which publish suspension bracket details. Check from below the car 4. Lift the car and establish on supports. 5. Check up drawing of a protector and pressure in tyres. 6. Check up a condition карданного the hinge between a steering column and картером the steering mechanism. 7. Check up presence on картере the steering mechanism подтеканий oils or infiltrations through linings. Be convinced of integrity of consolidations and protective covers, in reliability of fastening of collars of protective covers. 8. Check up reliability of fastening of details of a steering, absence on them of mechanical damages. Check up presence люфта spherical hinges the helmsman рейки. 9. Check up an inhaling of all carving connections, presence of the broken or disconnected details, a condition of sealants (are specified by an arrow in a photo at the left) and rubber plugs of a suspension bracket (a photo on the right). 10. Ask the assistant повращать a wheel, observe at wheel turn for люфтом in steering details, a bend of details, freedom of their moving (люфтами). At detection considerable люфтов in steering connections find ослабшее connection. 11. Check up bearings of wheels, rotating a wheel and shaking undertaken the top and bottom edges. Appreciable люфт specifies in necessity of dismantling of a nave and greasing replacement. 12. Check up a condition of bearings of rotary knot for what shake knot mount upwards-downwards. If it is found out люфт it is necessary to check up a condition of bearings of knot and to replace greasing. 13. Check up a condition карданных hinges, presence люфта sliding вильчатой муфты in шлицах a shaft. 14. Check up presence подтеканий in a boat of a distributing box and transmission.

Running gear greasing

PERFORMANCE ORDER

1. Greasing is carried out by a syringe through butterdishes (on a part of cars of an aperture under butterdishes are closed заглушками, butterdishes are rolled at greasing). 2. Greasing begin with rotary knot (the greasing place is specified by an arrow). Greasing continue until then while it will not seem from the greased knot. 3. Further grease a plug sliding шлицевой муфты (the greasing place is specified by an arrow). 4. Grease карданный the hinge (the greasing place is specified by an arrow). 5. Grease the terminator of turn of a wheel (the greasing place is specified by an arrow). 6. Grease литолом latches and a cowl rack. 7. Oil for the engine of a loop and locks of a cowl and doors. 8. Grease with aerosol graphite or silicone greasing drums of switches of locks and уплотнители doorways.