Toyota Land Cruiser
FJ60, FJ62 and FJ80 1980-1997 of release
Repair and car operation
Toyota Land Cruiser
+ 1. The maintenance instruction
- 2. Maintenance service
2.1. Additional maintenance service
2.2. Technical characteristics
2.3. An arrangement of units in a motor compartment
2.4. Maintenance service terms
+ 2.5. Check of level of liquids
2.6. Check of a condition of tyres and pressure in tyres
2.7. Liquid level in automatic transmission
2.8. Liquid level in system of a hydrodrive of a steering
2.9. Oil replacement in the engine and the oil filter
2.10. Check of a condition and care of the battery
2.11. Check of system of cooling
2.12. Check and replacement of hoses in a motor compartment
2.13. Check and replacement of brushes of a cleaner of a windscreen
2.14. Shift of wheels
2.15. Suspension bracket and steering check
2.16. Exhaust system check
2.17. Check of level of oil in a manual transmission
2.18. Check of level of oil in a distributing box
2.19. Check of level of oil in reducers of bridges
2.20. Check of a condition of seat belts
2.21. The thermostat of the air filter (carburettor engines)
2.22. Check and greasing of the exhaust valve
2.23. System of catching of steams of gasoline
2.24. System check recycling
2.25. Air заслонка the carburettor
2.26. A zolotnik of system of ventilation картера
2.27. Check and replacement of the air filter
2.28. Replacement of spark plugs
2.29. Check and adjustment of backlashes of valves
2.30. Idling turns (carburettor engines)
2.31. Drive belts
2.32. Check of fuel system
+ 2.33. Check of brakes
2.34. Check and adjustment of pedals of coupling (brake)
2.35. Replacement of the fuel filter
2.36. High-voltage wires, бегунок and distributor covers
2.37. Check and installation of the moment of ignition
2.38. Care of cooling system
2.39. Naves and bearings of forward wheels
2.40. Liquid replacement in automatic transmission and the filter
2.41. Oil replacement in a manual transmission
2.42. Oil replacement in a distributing box
2.43. Oil replacement in a back (forward) reducer
2.44. Backlashes in valves on the engine 1FZ-FE
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes
Conditioner hoses are checked and vary only in car-care centre service.
Under the influence of heats in a motor compartment gradually there is a hardening and destruction of the rubber and plastic hoses which are ensuring functioning of various units of the engine. It is necessary to check periodically a condition of hoses, presence on them of cracks and hardening, easing of connections, tightness infringement. The procedure for test of hoses of system of cooling is described in subsection 2.11.
Part of hoses fasten by means of collars. Check durability of an inhaling of collars as fastening easing leads to tightness infringement. In those places in which collars are not provided, check reliability of consolidation of a hose on unions, elasticity loss in such connections owing to swelling or hardening of hoses is not supposed, tightness of connection otherwise is broken.
Vacuum hoses can be distinguished on colour, or on the colour strips pasted on them. For various systems of the engine vacuum hoses with various in the thickness of walls, resistance to compression by atmospheric pressure and thermal stability are used. At replacement track that new vacuum hoses in accuracy corresponded to the replaced.
Frequently the hose can be checked up only after removal from the car. If some hoses act in film, preliminary put labels on interfaced the union and hoses subsequently not to break their relative positioning.
At check of a condition of vacuum hoses at the same time examine also plastic tees. Check up presence on them of cracks, and also hose deformations in a place прилегания to the union of a tee which can cause tightness infringement.
For check of leaks listen through a piece of a hose with internal diameter about 6 mm, having put a hose to a checked place. Characteristic "hissing" will specify in leak presence.
Check up a condition of rubber fuel hoses, presence on them of damages.
At replacement of a fuel highway on инжекторных engines the new highway should correspond in accuracy applied in fuel system of engines of the given type.
At replacement of hoses always establish collars with screw fastening.
Metal tubes are usually used in a fuel highway. Check up presence on tubes of the braided sites and small arising cracks.
At replacement it is necessary to establish only seamless steel tubes. Tubes from copper or aluminium do not approach, as do not maintain vibrating loadings from the engine.
Check up a condition of metal tubes and unions of system of a hydrodrive of brakes in junctions with the main brake cylinder and дозатором, presence of cracks and ослабших connections is not supposed.