Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
- 7. Transmission
   + 7.1. A mechanical transmission
   + 7.2. Automatic transmission
   + 7.3. A distributing box
   - 7.4. Coupling, карданные shaft, semiaxes and leading bridges
      7.4.1. Technical characteristics
      + 7.4.2. Coupling
      + 7.4.3. Карданный () a shaft (), a reducer and axes
      7.4.4. A lobby полуось and an epiploon
      - 7.4.5. The back (forward) bridge
         7.4.5.1. A reducer epiploon
         7.4.5.2. Полуось, the bearing and an epiploon (semiunloading semiaxes)
         7.4.5.3. Полуось and an epiploon (completely unloaded semiaxes)
         7.4.5.4. A nave of a back wheel (completely unloaded semiaxes)
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes



7.4.5.3. Полуось and an epiploon (completely unloaded semiaxes) Removal and installation

PERFORMANCE ORDER
1. Turn away a nut (are specified by arrows) a flange of a semiaxis and remove washers.
2. Blows on a semiaxis hairpin through brass оправку ослабьте conic washers also remove them from a nave.
3. Screw 2 bolts in technological apertures of a flange and turning, displace полуось from a nave. Remove полуось.
4. Examine полуось.
5. If necessary get an epiploon.
6. Before semiaxis installation slightly grease epiploon edges консистентной with greasing.
7. Before assemblage clear a surface and replace a flange lining.
8. Insert полуось and enter in шлицы differential gear wheels.
9. Further assemblage is carried out upside-down.