| 1. Remove the central section then access to a regulator is provided. |
| 2. Release the lever of a brake and turn away a counternut and an adjusting (bottom) nut. |
| 3. Remove a cable from the lever. |
| 4. Working under the car, extend a cable, having passed through an aperture in a floor. |
| 5. Remove from a frame cable arms. |
|
6. Remove from a crank an axis (it is specified by an arrow) and скобу. |
|
7. Turn away an arm bolt (it is specified by an arrow) on the jack and remove a cable. |
| 8. Installation is carried out upside-down. |
| 9. After assemblage adjust a manual brake. |
