Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
- 7. Transmission
   + 7.1. A mechanical transmission
   + 7.2. Automatic transmission
   + 7.3. A distributing box
   - 7.4. Coupling, карданные shaft, semiaxes and leading bridges
      7.4.1. Technical characteristics
      - 7.4.2. Coupling
         7.4.2.1. Coupling details
         7.4.2.2. The vyzhimnoj bearing
         7.4.2.3. The directing bearing
         7.4.2.4. The main cylinder of coupling
         7.4.2.5. The working cylinder of coupling
         7.4.2.6. A coupling hydrodrive
         7.4.2.7. A coupling pedal
      + 7.4.3. Карданный () a shaft (), a reducer and axes
      7.4.4. A lobby полуось and an epiploon
      + 7.4.5. The back (forward) bridge
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes



7.4.2.6. A coupling hydrodrive
THE GENERAL DATA

System prorolling is required every time after carrying out of dismantling and assemblage of a highway of a hydrodrive of coupling.

Air removal

PERFORMANCE ORDER
1. Fill a tank with a fresh brake liquid (use of the fulfilled liquid is forbidden).
2. Lift the car.
3. Remove a cap, dress on the union of the cylinder a hose.
4. Lower other end a hose in capacity filled with a brake liquid 5 see
5. Ask the assistant to press a coupling pedal to the full and turn away the prorolling union.
6. When the liquid will cease to follow wrap the union.
7. Ask the assistant to release a pedal slowly.
8. Repeat procedure until then while the hose with a liquid will not cease to leave air vials. Constantly watch level, – the tank should be filled by a liquid.
9. Tighten the union, dress a cap and lower the car.
10. Restore liquid level in a tank and check up coupling work.