Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
- 7. Transmission
   + 7.1. A mechanical transmission
   + 7.2. Automatic transmission
   + 7.3. A distributing box
   - 7.4. Coupling, карданные shaft, semiaxes and leading bridges
      7.4.1. Technical characteristics
      - 7.4.2. Coupling
         7.4.2.1. Coupling details
         7.4.2.2. The vyzhimnoj bearing
         7.4.2.3. The directing bearing
         7.4.2.4. The main cylinder of coupling
         7.4.2.5. The working cylinder of coupling
         7.4.2.6. A coupling hydrodrive
         7.4.2.7. A coupling pedal
      + 7.4.3. Карданный () a shaft (), a reducer and axes
      7.4.4. A lobby полуось and an epiploon
      + 7.4.5. The back (forward) bridge
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes



7.4.2.2. The vyzhimnoj bearing

Replacement

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove transmission.
3. Get spring скобу from a spherical support of a plug, disconnect a plug from a spherical support and remove выжимной the bearing.
4. The bearing should rotate freely in a holder.
5. Otherwise the bearing replace. To wash out the bearing in solvent it is forbidden.
6. Grease directing plug of the bearing and шлицы a primary shaft with refractory greasing.
7. Grease with refractory greasing dredging under a spherical support of a plug.
8. Grease places of fastening of the bearing and dredging under a pusher of the working cylinder.
9. Establish spring скобу.
10. Dress скобы and establish on a plug the bearing.
11. Dress the bearing on a primary shaft of a check point.
12. Pass a plug through a cover, grease a support and dress a plug on a support, having pressed on it before click.
13. Slightly grease with refractory greasing a surface of the bearing adjoining with диафрагменной by a spring.
14. Further assemblage is carried out upside-down.