Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
- 11. An electric equipment
   11.1. Search of malfunctions
   11.2. Safety locks
   11.3. Fusible crosspieces
   11.4. Breakers
   11.5. The relay
   11.6. The breaker of indexes of turn / of the alarm system
   11.7. A combination of switches on a steering column
   11.8. The lock of ignition and a lock drum
   11.9. Indexes of level of fuel, pressure and oil temperature
   11.10. A guard of devices
   11.11. The screen wiper electric motor
   11.12. The receiver and dynamics
   11.13. The aerial
   11.14. A heater of back glass
   11.15. Headlights
   11.16. The case галогенной headlights
   11.17. A sound signal
   11.18. Replacement of lamps
   11.19. Lateral mirrors with the electric drive
   11.20. Cruise-control system
   11.21. The electric drive window lifterа
   11.22. The electric drive of door-locks
   11.23. Safety pillows
+ 12. Electroschemes

11.8. The lock of ignition and a lock drum

THE GENERAL DATA

The diagramme for check of the lock of ignition on cars FJ60

The diagramme for check of the lock of ignition on cars FJ62

The diagramme for check of the lock of ignition on cars FJ80

Check

PERFORMANCE ORDER

1. Disconnect a socket of the lock of ignition, having found it on wires.

2. An ohmmeter or a control lamp check up chain presence between the specified conclusions, in different positions of a key. Replace the lock if results at least with one of checks the negative.

Replacement

PERFORMANCE ORDER

1. Disconnect the battery from weight.

2. Translate a key in position АСС.

3. Remove a wheel.

4. Remove a casing of a steering column.

5. Remove from a shaft of a wheel a combination of switches.

Replacement of the lock of ignition

6. Disconnect sockets of wires.

7. Turn away screws of fastening and remove the lock.

8. Installation is carried out upside-down.

Replacement of the switch (drum) of the lock

9. On a part of cars get a ring of illumination of the lock.

10. Press a pin, remove the lock, having submitted it upwards.

11. At lock installation press on a pin and insert the lock into an aperture before fixing by a pin.

12. Further assemblage is carried out upside-down.