Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
- 11. An electric equipment
   11.1. Search of malfunctions
   11.2. Safety locks
   11.3. Fusible crosspieces
   11.4. Breakers
   11.5. The relay
   11.6. The breaker of indexes of turn / of the alarm system
   11.7. A combination of switches on a steering column
   11.8. The lock of ignition and a lock drum
   11.9. Indexes of level of fuel, pressure and oil temperature
   11.10. A guard of devices
   11.11. The screen wiper electric motor
   11.12. The receiver and dynamics
   11.13. The aerial
   11.14. A heater of back glass
   11.15. Headlights
   11.16. The case галогенной headlights
   11.17. A sound signal
   11.18. Replacement of lamps
   11.19. Lateral mirrors with the electric drive
   11.20. Cruise-control system
   11.21. The electric drive window lifterа
   11.22. The electric drive of door-locks
   11.23. Safety pillows
+ 12. Electroschemes



11.17. A sound signal
THE GENERAL DATA

The prevention

Preliminary check up safety locks.


Check

PERFORMANCE ORDER
1. Disconnect from a signal a socket.
2. Directly connect to a signal the battery. In the absence of a sound a signal replace.
3. If the sound is, check up pressure on a conclusion by pressing the signal button. In the presence of pressure check up connection with weight.
4. If pressure is not present, check up the relay. It is necessary to consider that relays of a sound signal basically have 4 or 3 conclusions (3-vyvodnye relays have connection with weight through the case).
5. If the relay is serviceable, check up pressure on relay conclusions. If pressure is not present, check up wires from a safety lock to the relay.
6. If on conclusions of the relay pressure is, press the button of a signal and check up a chain of connection with weight between the relay and the button. If breakage is not present, replace the signal button.
7. If through the button the chain on weight becomes isolated, check up presence in a chain from the relay on the breakage or short circuit button.

Replacement

PERFORMANCE ORDER
1. Remove a forward lattice.
2. For replacement of a sound signal disconnect a socket and turn away fastening bolts (are specified by arrows) signal arm.
3. Installation is carried out upside-down.