Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
- 5. Fuel and exhaust systems
   + 5.1. Carburettor engines
   - 5.2. Engines with fuel injection
      5.2.1. Technical characteristics
      5.2.2. Декомпрессия fuel system
      + 5.2.3. The fuel pump and pressure of fuel
      5.2.4. Gasoline pipe lines and joints
      5.2.5. The fuel pump
      5.2.6. The gauge of level of fuel
      5.2.7. The air filter
      5.2.8. A cable of a drive throttle заслонки
      + 5.2.9. System of electronic injection of fuel (EFI-system)
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes



5.2.6. The gauge of level of fuel

Check

PERFORMANCE ORDER
1. Before check of the gauge of level of fuel completely fill a tank with gasoline.
2. On cars of 1988-90 find a socket which is near to a tank, on cars from 1991 of release remove a back seat and a cover лючка.
3. Disconnect a socket of the gauge of level of fuel.
4. Measure resistance of the gauge between conclusions.
5. At completely filled tank resistance should be 17 Ohm (1988-90) or 3 Ohm on cars since 1991
6. At an empty tank resistance should be 120 Ohm (1988-90) or 110 Ohm on cars since 1991
7. Replace the gauge if resistance differs from the specified.
8. The gauge can be checked up also, having removed it from a tank. Measure resistance at completely lowered float (a tank empty) and in extreme top position of a float (a full tank).

Replacement

PERFORMANCE ORDER
1. Remove from a fuel tank the pump in gathering with the gauge.
2. Incline and cautiously get the gauge.
3. Disconnect a socket, turn away screws of fastening and remove the gauge.
4. The gauge is established upside-down.