Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
- 5. Fuel and exhaust systems
   + 5.1. Carburettor engines
   - 5.2. Engines with fuel injection
      5.2.1. Technical characteristics
      5.2.2. Декомпрессия fuel system
      + 5.2.3. The fuel pump and pressure of fuel
      5.2.4. Gasoline pipe lines and joints
      5.2.5. The fuel pump
      5.2.6. The gauge of level of fuel
      5.2.7. The air filter
      5.2.8. A cable of a drive throttle заслонки
      + 5.2.9. System of electronic injection of fuel (EFI-system)
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

5.2.5. The fuel pump
Removal

PERFORMANCE ORDER

1. Execute декомпрессию.

2. Disconnect the battery from weight.

3. Remove a fuel tank (on cars 1988-90)

4. On cars from 1991 of release remove an average seat and лючок.

5. Disconnect a socket and gasoline pipe line tubes.

6. Turn away bolts (are specified by arrows) fastenings of the fuel pump and the gauge of level of fuel.

7. Having inclined, cautiously get from a fuel tank the fuel pump in gathering with the gauge.

8. Cautiously having hooked the bottom part of the pump get the pump from an arm.

9. Remove from the pump a rubber lining.

10. Remove a lock washer of fastening of the filter of rough clearing to the pump.

11. Remove the filter and check up its condition. In case of strong pollution the filter replace.

12. If replacement of the filter of rough clearing that is made only establish the new filter, a washer, a lining and insert the bottom part of the pump back into an arm. Establish the pump in gathering with the gauge in a fuel tank.

13. If the fuel pump remove a collar is replaced and disconnect a hose.

14. Disconnect wires from conclusions of the pump and remove the pump.

Installation

PERFORMANCE ORDER

1. Installation is carried out upside-down.

2. Replace linings of unions of gasoline pipe lines.