Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. Engines
   + 3.1. Engines 2F and 3F-E
   + 3.2. The verhneklapannyj engine 1FZ-FE
   + 3.3. Dismantle and engine major repairs
   - 3.4. An engine electric equipment
      3.4.1. Technical characteristics
      3.4.2. The battery
      3.4.3. Power cables
      + 3.4.4. Ignition system
      3.4.5. The ignition coil
      3.4.6. The ignition distributor
      3.4.7. The block of electronic ignition
      3.4.8. The induction gauge
      + 3.4.9. System of a charge of the battery
      3.4.10. The generator
      3.4.11. Generator details
      3.4.12. System of start-up of the engine
      3.4.13. The starter electric motor
      3.4.14. The traction relay of a starter (а/м 1980-87 of release)
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes


122d58df

3.4.5. The ignition coil

Check
PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove a plastic cap of the coil (if it is provided).
3. Turn away two bolts of fastening of a socket of the coil and connect probeы an ohmmeter.
4. Measure resistance between positive and negative coil conclusions. Compare result to standard value.
5. Measure resistance of a secondary winding, i.e. between a positive conclusion of the coil and a high-voltage conclusion. Compare result to standard value.
6. If resistance differ from standard the ignition coil replace.

Replacement

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove from the coil the thermal screen.
3. Designate and disconnect from the wire coil.
4. Turn away fastening screws (are shown by arrows) and remove the coil.
5. The coil is established upside-down.