Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. Engines
   + 3.1. Engines 2F and 3F-E
   - 3.2. The verhneklapannyj engine 1FZ-FE
      3.2.1. Technical characteristics
      3.2.2. Kinds of repair without engine dismantle
      3.2.3. A cover of a head of cylinders
      3.2.4. A soaking up collector
      3.2.5. A final collector
      3.2.6. Cam-shafts and pushers
      3.2.7. A head of cylinders
      3.2.8. A cover of a chain drive of cam-shafts
      3.2.9. A forward epiploon коленвала
      3.2.10. The oil pallet
      3.2.11. The oil pump
      3.2.12. A flywheel (a leading disk of the hydrotransformer)
      3.2.13. A back epiploon коленвала
      3.2.14. Suspension bracket and engine details
   + 3.3. Dismantle and engine major repairs
   + 3.4. An engine electric equipment
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

3.2.9. A forward epiploon коленвала Replacement

PERFORMANCE ORDER

1. Remove belts and a pulley коленвала.

2. Define depth запрессовки an epiploon, then cautiously get an epiploon from the case of the oil pump, having hooked a screw-driver or the special tool.

3. It is possible to make an incision also an epiploon (1 – a place of a cut of an epiploon at removal).

4. Clear an aperture under an epiploon in the case of the oil pump, slightly oil an external surface for the engine, working edges of a new epiploon grease молибденовой with greasing.

5. Cautiously without warps запрессуйте a new epiploon into place with the help оправки with a diameter a bit smaller than diameter of an epiploon. Запрессовывать on the depth noted before dismantling. After installation be convinced that кроымка an epiploon was not unbent.

6. Establish other details upside-down.

7. Start the engine and be convinced of absence of a leak.