Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
- 8. Brake system
   8.1. Technical characteristics
   + 8.2. ABS-system
   8.3. Колодки disk brakes (forward or back)
   8.4. A brake support
   8.5. A brake disk
   8.6. Колодки drum-type brakes
   8.7. The wheel cylinder of brakes
   8.8. The main cylinder of brakes
   8.9. Hoses and hydrodrive tubes
   8.10. Removal of air from a hydrodrive of brakes
   8.11. The vacuum amplifier of brakes
   8.12. Колодки a manual brake of back disk brakes
   8.13. Adjustment of a manual brake
   8.14. A cable of a manual brake
   8.15. The switch of a signal of braking
   8.16. A regulator of pressure of back brakes (dosing out and перепускной the valve)
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes


8.15. The switch of a signal of braking

Switch arrangement

The switch (it is specified by an arrow) is mounted in the top part of a pedal. By pressing a pedal switch contacts the lamp of a signal of braking becomes isolated and lights up.

Removal and installation

1. Disconnect the battery from weight.
2. Disconnect from the switch a socket.
3. Release a counternut and remove the switch from a pedal arm.
4. Installation is carried out upside-down.


1. Release a counternut and move the switch, having established a standard backlash with a pedal.
2. Attach wires to the switch, connect the battery to weight.
3. Check up switch work.