Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation


Toyota Land Cruiser
+ 1. The maintenance instruction
- 2. Maintenance service
   2.1. Additional maintenance service
   2.2. Technical characteristics
   2.3. An arrangement of units in a motor compartment
   2.4. Maintenance service terms
   + 2.5. Check of level of liquids
   2.6. Check of a condition of tyres and pressure in tyres
   2.7. Liquid level in automatic transmission
   2.8. Liquid level in system of a hydrodrive of a steering
   2.9. Oil replacement in the engine and the oil filter
   2.10. Check of a condition and care of the battery
   2.11. Check of system of cooling
   2.12. Check and replacement of hoses in a motor compartment
   2.13. Check and replacement of brushes of a cleaner of a windscreen
   2.14. Shift of wheels
   2.15. Suspension bracket and steering check
   2.16. Exhaust system check
   2.17. Check of level of oil in a manual transmission
   2.18. Check of level of oil in a distributing box
   2.19. Check of level of oil in reducers of bridges
   2.20. Check of a condition of seat belts
   2.21. The thermostat of the air filter (carburettor engines)
   2.22. Check and greasing of the exhaust valve
   2.23. System of catching of steams of gasoline
   2.24. System check recycling
   2.25. Air заслонка the carburettor
   2.26. A zolotnik of system of ventilation картера
   2.27. Check and replacement of the air filter
   2.28. Replacement of spark plugs
   2.29. Check and adjustment of backlashes of valves
   2.30. Idling turns (carburettor engines)
   2.31. Drive belts
   2.32. Check of fuel system
   + 2.33. Check of brakes
   2.34. Check and adjustment of pedals of coupling (brake)
   2.35. Replacement of the fuel filter
   2.36. High-voltage wires, бегунок and distributor covers
   2.37. Check and installation of the moment of ignition
   2.38. Care of cooling system
   2.39. Naves and bearings of forward wheels
   2.40. Liquid replacement in automatic transmission and the filter
   2.41. Oil replacement in a manual transmission
   2.42. Oil replacement in a distributing box
   2.43. Oil replacement in a back (forward) reducer
   2.44. Backlashes in valves on the engine 1FZ-FE
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes


122d58df

2.9. Oil replacement in the engine and the oil filter
THE GENERAL DATA

Timely replacement of oil is most the effectual measures applied by the owner to avoid of premature deterioration of the engine owing to ageing of oil, it разжижения and pollution.

PERFORMANCE ORDER
1. For providing of access to the bottom part of the car, last is necessary for establishing on two supports with a cross-beam, either to lift тельфером, or to call in on a hole or a platform.
2. Find a drain stopper of the pallet of the engine.
3. Establish the car on a horizontal platform. Warm up the engine, stop and turn away a stopper маслозаливной mouths on a cover of a head of cylinders.
4. Lift the car and establish on supports.
5. Cautiously, trying not to concern hot details of an exhaust system, substitute the pallet and turn away a stopper.
6. Merge oil, check up presence in the merged oil of metal shavings and sawdust.
7. After oil running off wipe a stopper pure rags.
8. Wipe the pallet about a drain aperture and cautiously tighten a stopper.
9. Substitute the pallet under the oil filter.
10. Clean from under the car all tools and lower the car.
11. By means of a special key turn away the oil filter (it is specified by an arrow) (to rotate counter-clockwise) then turn out the filter hands.
12. Carefully clear a place прилегания filter consolidations on the block of cylinders.
13. Be convinced that the type and the sizes of the new filter completely coincide with type and the sizes of the fulfilled. Slightly oil for the engine a rubber lining of the new filter and wrap the filter into place.
14. Wrap the filter before contact of a lining with a surface of the block of cylinders, tighten the filter, having turned on 3/4 turns.
15. Fill in about 3 l of oil, a few having waited, check up oil level. If level normal turn a stopper of a mouth and tighten by hand. Start the engine that oil has filled all lubricant channels.
16. On the working engine check up tightness of a stopper of the pallet and the filter, having tracked these places within a minute. At leak occurrence stop the engine and tighten a stopper or the filter.
17. Stop the engine and wait some minutes that oil has flown down in the pallet. Again check up oil level on probeу. If necessary add oil to the top mark on probeе.

18. In we say lies several trips after oil change in the engine watch a leak and check oil level.