Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
- 9. Suspension brackets and a steering
   9.1. Technical characteristics
   9.2. The stabilizer of a forward suspension bracket and the plug
   9.3. Forward and back shock-absorbers
   9.4. Springs and plugs
   9.5. Springs of suspension brackets (а/м FJ80)
   9.6. A cross-section bar (а/м FJ80)
   9.7. Suspension bracket levers (а/м FJ80)
   9.8. A rotary fist
   9.9. A steering wheel
   9.10. Steering draughts
   9.11. A reducer
   9.12. The hydraulic booster pump
   9.13. Removal of air from the wheel hydraulic booster
   9.14. Wheels and tyres
   9.15. Corners of installation of forward wheels
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes


9.11. A reducer



The prevention

If the car is equipped by a safety pillow turn of wheels after reducer removal is not supposed. Block a wheel for what translate the ignition key in position LOCK, or wind a wheel with a seat belt which fix.

1. Lift car redock.
2. Turn on and muffle the union (are specified by arrows).
3. Designate position of the bottom plug карданного the hinge of a steering shaft concerning a reducer shaft. Turn away a collar bolt (it is specified by an arrow).
4. Remove сошку.
5. Turn away fastening bolts (are specified by arrows), submit a reducer downwards and disconnect from an intermediate steering shaft. Remove a reducer.


1. Establish a reducer, having combined the labels put at dismantling.
2. Tighten bolts of fastening with the set moment.
3. Establish сошку on a reducer shaft, having combined the labels put at dismantling.
4. Tighten a bolt of a collar with the set moment.
5. Attach the union of the hydraulic booster and restore liquid level.
6. Establish a wheel and lower the car.