Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
- 5. Fuel and exhaust systems
+ 5.1. Carburettor engines
- 5.2. Engines with fuel injection
5.2.1. Technical characteristics
5.2.2. Декомпрессия fuel system
+ 5.2.3. The fuel pump and pressure of fuel
5.2.4. Gasoline pipe lines and joints
5.2.5. The fuel pump
5.2.6. The gauge of level of fuel
5.2.7. The air filter
5.2.8. A cable of a drive throttle заслонки
+ 5.2.9. System of electronic injection of fuel (EFI-system)
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes
|
Check
PERFORMANCE ORDER |
1. At performance of any works under the car always check a condition of the gasoline pipe lines, all joints and connections. |
2. Check up presence on hoses and tubes of cracks, breaks, deformations. |
3. Be convinced of reliability of fastening of gasoline pipe lines to the body bottom, check up a condition fixing скоб. |
4. Check tightness of connections of hoses with unions of metal tubes, a condition of collars of hoses. |
|
Replacement
PERFORMANCE ORDER |
1. New details of a fuel highway should be made from this a material, as replaced details. |
2. It is forbidden to establish hoses and tubes from the materials, not corresponding recommended, or not расчитанных on fuel influence. |
3. Before dismantling of a fuel highway, or a detachment of any detail, always mark a relative positioning of tubes and hoses, remember initial installation of collars and шплинтов that at assemblage in accuracy to restore an initial arrangement of these details. |
|
4. Observe the scheme and an order of fastening of hoses (2) on unions of metal tubes (1) (3 – a collar). |
5. Before gasoline pipe line dismantling execute actions on декомпрессии highways of fuel system, turn away a stopper of a jellied mouth of a tank and disconnect the battery from weight. |
6. Wrap up assorted connection by rags for впитывания spilt gasoline. |
|
|
|