Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
- 5. Fuel and exhaust systems
   - 5.1. Carburettor engines
      5.1.1. The fuel pump and pressure of fuel
      5.1.2. A gasoline pipe line
      + 5.1.3. A fuel tank
      5.1.4. The fuel pump
      5.1.5. The gauge of level of fuel
      5.1.6. The air filter
      5.1.7. A cable of a drive throttle заслонки
      + 5.1.8. The carburettor
      5.1.9. Exhaust system service
   + 5.2. Engines with fuel injection
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes


5.1.5. The gauge of level of fuel

Check of the gauge of level of fuel

F – full

E – empty

Check and replacement

1. Before check of the gauge of level of fuel define quantity of fuel in a tank.
2. On cars of early releases gauge conducting is under a tank.
3. On cars of late releases it is necessary to remove an average seat and a cover лючка.
4. Disconnect the battery from weight and a gauge socket on a tank.
5. Check up resistance of the gauge which at completely filled tank should be 17 Ohm, and at empty – nearby 120 Ohm.
6. It is possible to remove also the gauge and to check up resistance under the scheme (fig. Check of the gauge of level of fuel see).
7. If resistance of the gauge differ, the gauge replace.
8. For gauge replacement remove a tank on cars of early release, and on cars of a series 80 remove an average seat.
9. Slightly having inclined, cautiously get the gauge with an arm.
10. Disconnect a socket, turn away the screw and remove the gauge from an arm.
11. The gauge is established upside-down.