Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. Engines
   + 3.1. Engines 2F and 3F-E
   - 3.2. The verhneklapannyj engine 1FZ-FE
      3.2.1. Technical characteristics
      3.2.2. Kinds of repair without engine dismantle
      3.2.3. A cover of a head of cylinders
      3.2.4. A soaking up collector
      3.2.5. A final collector
      3.2.6. Cam-shafts and pushers
      3.2.7. A head of cylinders
      3.2.8. A cover of a chain drive of cam-shafts
      3.2.9. A forward epiploon коленвала
      3.2.10. The oil pallet
      3.2.11. The oil pump
      3.2.12. A flywheel (a leading disk of the hydrotransformer)
      3.2.13. A back epiploon коленвала
      3.2.14. Suspension bracket and engine details
   + 3.3. Dismantle and engine major repairs
   + 3.4. An engine electric equipment
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

3.2.3. A cover of a head of cylinders Removal

PERFORMANCE ORDER

1. Disconnect the battery from weight.

2. Remove an air inlet, disconnect from a cover ventilation hoses картера.

3. Remove заглушки candles, disconnect wires.

4. Disconnect cables throttle заслонки and the cruise-control and take aside. Remove a hook for engine posting in a forward part of a soaking up collector.

5. Turn away bolts of a cover of a head of cylinders, uncover also a lining. If the cover does not give in, displace its blows of a hammer through the soft prorate, or cautiously open consolidation шпателем.

Installation

PERFORMANCE ORDER

1. Carefully clear condensed surfaces of a cover and a head of cylinders, remove oil traces. Establish a new lining in a cover flute (the lining can to be changed if it has not hardened and on it there are no damages). Track safety of sealants of casings candles (are specified by arrows).

2. Put hermetic on semicircular заглушки (are specified by an arrow) and establish them on a head of cylinders.

3. Establish a cover and wrap bolts.

4. In regular intervals tighten bolts of a cover with the set moment.

5. Establish other details, start the engine and be convinced of absence of a leak.