Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. Engines
   - 3.1. Engines 2F and 3F-E
      3.1.1. Technical characteristics
      3.1.2. Kinds of repair without engine dismantle
      3.1.3. Installation of the piston of 1st cylinder in ВМТ
      3.1.4. A cover of a head of cylinders
      3.1.5. A lateral cover of the mechanism timing
      3.1.6. Коромысла and bars of pushers
      3.1.7. Springs of valves, plates, маслосъемные caps
      3.1.8. Soaking up and final collectors
      3.1.9. A head of cylinders
      3.1.10. Pushers
      3.1.11. A pulley коленвала
      3.1.12. A forward epiploon коленвала
      3.1.13. A forward cover
      3.1.14. A cam-shaft and drive gear wheels
      3.1.15. A cam-shaft and support
      3.1.16. Replacement of bearings
      3.1.17. The oil pallet
      3.1.18. The oil pump
      3.1.19. A flywheel (a leading disk of the hydrotransformer)
      3.1.20. A back epiploon коленвала
      3.1.21. Suspension bracket and engine details
   + 3.2. The verhneklapannyj engine 1FZ-FE
   + 3.3. Dismantle and engine major repairs
   + 3.4. An engine electric equipment
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes


3.1.20. A back epiploon коленвала


1. The epiploon can be removed without dismantle of the oil pallet or коленвала.
2. Remove a check point (transmission) (subsection 7.1.2 or subsection 7.2.8 see).
3. Remove coupling.
4. Remove a flywheel (a leading disk).
5. Cautiously hook and get an epiploon.
6. Clear and check up a surface condition проточки under an epiploon in the block of cylinders and a neck condensed with an epiploon коленвала. At detection of deep development коленвал replace.
7. Grease working edges of a new epiploon молибденовой with greasing, external edges grease universal консистентной with greasing.
8. Cautiously dress an epiploon on a neck коленвала and запрессуйте an epiploon оправкой.
9. Further assemblage is carried out upside-down. Establish transmission (subsection 7.1.2 or subsection 7.2.8 see).