Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
- 10. A body
   10.1. Maintenance service and repair
   10.2. Vinyl furnish
   10.3. An upholstery and rugs
   10.4. Repair of insignificant damages
   10.5. Repair of considerable damages
   10.6. Loops and locks
   10.7. A windscreen and motionless glasses
   10.8. A cowl
   10.9. A latch of a cowl and a drive cable
   10.10. A forward lattice
   10.11. A forward wing
   10.12. The internal panel of a door
   10.13. The door lock, the lock and handle switch
   10.14. Door glass
   10.15. Стеклоподъемник
   10.16. Lateral mirrors
   10.17. A door
   10.18. A door of a back compartment
   10.19. A back cover (the top door of a back compartment)
   10.20. A casing of a steering column
   10.21. Panels of forward facing of salon
   10.22. Average floor section
   10.23. The forward facing panel of salon
   10.24. Seats
   10.25. Bumpers
+ 11. An electric equipment
+ 12. Electroschemes


10.12. The internal panel of a door Cнятие and installation

1. Disconnect the battery from weight.
2. Remove a decorative overlay of the internal door handle.
3. On cars with manual window lifterом remove the handle window lifterа for what with remove a latch, having hooked its thin bent tool.
4. On cars with the electric drive window lifterа hook and get from an armrest a plate of the switch and disconnect a socket.
5. Turn away screws and remove an armrest.
6. Turn away fastening screws on the bottom edge of the panel of a door and get panel latches, having pushed the tool between an overlay and a door.
7. Be convinced that all latches and screws are removed, disconnect the panel and disconnect all sockets. Remove the panel, a few having submitted upwards.
8. To provide access to details of the internal device of a door remove an arm of the internal panel (if it is provided) and cautiously get a water filter. At assemblage establish the screen into place, for fastening slightly grease the screen.
9. Installation is carried out upside-down.