1. Find on a wire an electric motor socket on the basic plait and
Disconnect a socket. |
| |
2. Check up resistance between conclusions 2 and 3 sockets. Resistance should be 0,3–100 Ohm. Otherwise the electric motor replace. |
| 3. Check up resistance of isolation (between conclusions 2 both 3 and weight) which should be not less than 0,5 Ohm. Otherwise the electric motor replace. |
| 4. Disconnect a hose сапуна and an electric drive socket. |
|
5. Turn away bolts and remove the electric motor. |
| 6. Installation is carried out upside-down. |
