Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
- 10. A body
   10.1. Maintenance service and repair
   10.2. Vinyl furnish
   10.3. An upholstery and rugs
   10.4. Repair of insignificant damages
   10.5. Repair of considerable damages
   10.6. Loops and locks
   10.7. A windscreen and motionless glasses
   10.8. A cowl
   10.9. A latch of a cowl and a drive cable
   10.10. A forward lattice
   10.11. A forward wing
   10.12. The internal panel of a door
   10.13. The door lock, the lock and handle switch
   10.14. Door glass
   10.15. Стеклоподъемник
   10.16. Lateral mirrors
   10.17. A door
   10.18. A door of a back compartment
   10.19. A back cover (the top door of a back compartment)
   10.20. A casing of a steering column
   10.21. Panels of forward facing of salon
   10.22. Average floor section
   10.23. The forward facing panel of salon
   10.24. Seats
   10.25. Bumpers
+ 11. An electric equipment
+ 12. Electroschemes


122d58df

10.23. The forward facing panel of salon
THE GENERAL DATA

Fastening of facing of a guard of devices on cars FJ60, 62

Bolts of fastening of the forward panel on cars FJ60, 62

Bolts of fastening of the forward panel on cars FJ80


PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove a wheel (subsection 9.9 see).
3. Remove average floor section.
4. Remove a box for trifles, facing of a guard of devices, facing of a radio tape recorder and подколенник from outside the driver.
5. Remove the receiver and a guard of devices.
6. Remove the control panel a heater.
7. Turn away a nut and bolts of fastening of the assembly block of safety locks and the handle of a cable of a latch of a cowl.
8. On cars with fuel injection remove the processor block which is mounted under a box for trifles.
9. Turn away bolts and lower on a floor a steering column.
10. On cars FJ60, 62 remove facing of a guard of devices.
11. Turn away bolts of fastening of the panel.
12. Submit the panel on itself and disconnect all sockets which can prevent removal.
13. Raise the panel and remove.
14. Installation is carried out upside-down.